Variable: coneAttributes
ts
const coneAttributes: ObjectNode<{
anchor: Attr<"center" | "tip" | "tail" | "cm", {
description: "Which part of the cone sits at its position: the tip, the tail (base), the center of mass (`cm`, a quarter of the way from tail to tip) or the middle (`center`).";
dflt: "cm";
editType: "calc";
values: readonly ["tip", "tail", "cm", "center"];
}>;
autocolorscale: AttrSpec<boolean, boolean | undefined>;
cauto: AttrSpec<boolean, boolean | undefined>;
cmax: AttrSpec<number, number | undefined>;
cmid: AttrSpec<number, number | undefined>;
cmin: AttrSpec<number, number | undefined>;
coloraxis: AttrSpec<string, string | undefined>;
colorbar: ObjectNode<{
bgcolor: Attr<string, {
description: "Background of the box.";
dflt: "rgba(0,0,0,0)";
}>;
bordercolor: Attr<string, {
description: "Border color of the colorbar box.";
dflt: "#444";
}>;
borderwidth: Attr<number, {
description: "Border width of the box, px.";
dflt: 0;
min: 0;
}>;
dtick: AttrSpec<unknown, unknown>;
exponentformat: Attr<"none" | "e" | "E" | "power" | "SI" | "B", {
description: "How large and small numbers are written: `none` (1000000), `e` (1e+6), `E` (1E+6), `power` (1×10⁶), `SI` (1M), `B` (like SI but 1B for 10⁹).";
dflt: "B";
editType: readonly (
| "calc"
| "calcIfAutorange"
| "crossTraceCalc"
| "layout"
| "ticks"
| "plot"
| "style"
| "colorbars"
| "legend"
| "modebar"
| "camera"
| "none")[];
values: readonly ["none", "e", "E", "power", "SI", "B"];
}>;
len: Attr<number, {
description: "Length of the colorbar along its axis, padding included (`ypad` / `xpad`).";
dflt: 1;
min: 0;
}>;
lenmode: Attr<"fraction" | "pixels", {
description: "Unit of `len`: px, or a fraction of the plot height (`v`) / width (`h`).";
dflt: "fraction";
values: readonly ["fraction", "pixels"];
}>;
minexponent: Attr<number, {
description: "Smallest decimal exponent written in exponent form (`SI`/`B` and exponent formats); smaller magnitudes are written out in full.";
dflt: 3;
editType: readonly (
| "calc"
| "calcIfAutorange"
| "crossTraceCalc"
| "layout"
| "ticks"
| "plot"
| "style"
| "colorbars"
| "legend"
| "modebar"
| "camera"
| "none")[];
min: 0;
}>;
nticks: Attr<number, {
description: "Maximum number of ticks for `tickmode: auto` (the actual number may be lower so steps stay round). 0 picks it from the axis length.";
dflt: 0;
editType: "ticks";
min: 0;
}>;
orientation: Attr<"v" | "h", {
description: "Vertical bar (`v`, beside the plot) or horizontal bar (`h`, above or below).";
dflt: "v";
values: readonly ["h", "v"];
}>;
outlinecolor: Attr<string, {
description: "Color of the outline around the bar.";
dflt: "#444";
}>;
outlinewidth: Attr<number, {
description: "Outline width, px.";
dflt: 1;
min: 0;
}>;
separatethousands: Attr<boolean, {
description: "Always separate thousands (1,000). By default only numbers with 5 or more integer digits are separated.";
dflt: false;
editType: readonly (
| "calc"
| "calcIfAutorange"
| "crossTraceCalc"
| "layout"
| "ticks"
| "plot"
| "style"
| "colorbars"
| "legend"
| "modebar"
| "camera"
| "none")[];
}>;
showexponent: Attr<"none" | "all" | "first" | "last", {
description: "Which tick labels show the exponent.";
dflt: "all";
editType: readonly (
| "calc"
| "calcIfAutorange"
| "crossTraceCalc"
| "layout"
| "ticks"
| "plot"
| "style"
| "colorbars"
| "legend"
| "modebar"
| "camera"
| "none")[];
values: readonly ["all", "first", "last", "none"];
}>;
showticklabels: Attr<boolean, {
description: "Show tick labels.";
dflt: true;
editType: readonly (
| "calc"
| "calcIfAutorange"
| "crossTraceCalc"
| "layout"
| "ticks"
| "plot"
| "style"
| "colorbars"
| "legend"
| "modebar"
| "camera"
| "none")[];
}>;
showtickprefix: Attr<"none" | "all" | "first" | "last", {
description: "Which tick labels get `tickprefix`.";
dflt: "all";
editType: readonly (
| "calc"
| "calcIfAutorange"
| "crossTraceCalc"
| "layout"
| "ticks"
| "plot"
| "style"
| "colorbars"
| "legend"
| "modebar"
| "camera"
| "none")[];
values: readonly ["all", "first", "last", "none"];
}>;
showticksuffix: Attr<"none" | "all" | "first" | "last", {
description: "Which tick labels get `ticksuffix`.";
dflt: "all";
editType: readonly (
| "calc"
| "calcIfAutorange"
| "crossTraceCalc"
| "layout"
| "ticks"
| "plot"
| "style"
| "colorbars"
| "legend"
| "modebar"
| "camera"
| "none")[];
values: readonly ["all", "first", "last", "none"];
}>;
thickness: Attr<number, {
description: "Thickness of the color bar.";
dflt: 30;
min: 0;
}>;
thicknessmode: Attr<"fraction" | "pixels", {
description: "Unit of `thickness`: px, or a fraction of the plot width (`v`) / height (`h`).";
dflt: "pixels";
values: readonly ["fraction", "pixels"];
}>;
tick0: AttrSpec<unknown, unknown>;
tickangle: Attr<number | "auto", {
description: "Tick-label rotation in degrees. `auto` rotates x-axis labels by the first `autotickangles` entry that avoids overlap.";
dflt: "auto";
editType: readonly (
| "calc"
| "calcIfAutorange"
| "crossTraceCalc"
| "layout"
| "ticks"
| "plot"
| "style"
| "colorbars"
| "legend"
| "modebar"
| "camera"
| "none")[];
extras: readonly ["auto"];
}>;
tickcolor: Attr<string, {
description: "Tick color. Defaults to `color`.";
editType: "ticks";
}>;
tickfont: ObjectNode<{
color: Attr<string, {
description: "Text color.";
editType: "style";
}>;
family: Attr<string, {
description: "CSS font-family list. The renderer uses the first family it can load and falls back through the list.";
noBlank: true;
strict: true;
}>;
lineposition: Attr<
| "none"
| "under"
| "over"
| "through"
| `under+${string}`
| `over+${string}`
| `through+${string}`, {
description: "Text decoration: `under`, `over` and/or `through` joined with `+` (e.g. `under+over`), or `none`.";
extras: readonly ["none"];
flags: readonly ["under", "over", "through"];
}>;
shadow: Attr<string, {
description: "CSS `text-shadow` behind the text (`2px 2px 3px black`; only the first shadow is drawn), `none`, or `auto` for a thin halo in the contrast color of the text.";
}>;
size: Attr<number, {
description: "Font size in CSS pixels.";
min: 1;
}>;
style: Attr<"normal" | "italic", {
description: "Font style.";
values: readonly ["normal", "italic"];
}>;
textcase: Attr<"normal" | "word caps" | "upper" | "lower", {
description: "Letter case transform: `upper`, `lower`, `word caps` (first letter of each word), or `normal`.";
values: readonly ["normal", "word caps", "upper", "lower"];
}>;
variant: Attr<
| "normal"
| "small-caps"
| "all-small-caps"
| "all-petite-caps"
| "petite-caps"
| "unicase", {
description: "Capitals variant (CSS `font-variant-caps`). The SDF text renderer approximates small and petite caps with uppercase letters at a reduced size.";
values: readonly ["normal", "small-caps", "all-small-caps", "all-petite-caps", "petite-caps", "unicase"];
}>;
weight: Attr<number | "normal" | "bold", {
description: "Font weight: a CSS numeric weight (1–1000), `normal` or `bold`.";
extras: readonly ["normal", "bold"];
max: 1000;
min: 1;
}>;
}>;
tickformat: Attr<string, {
description: "Tick-label format: a d3-format specifier for numbers (`.2f`, `~s`, `$,`) or a d3-time-format specifier for dates (`%b %Y`), plus `%{n}f` for `n` digits of fractional seconds and `%h` for the half year. Empty picks a format automatically.";
dflt: "";
editType: readonly (
| "calc"
| "calcIfAutorange"
| "crossTraceCalc"
| "layout"
| "ticks"
| "plot"
| "style"
| "colorbars"
| "legend"
| "modebar"
| "camera"
| "none")[];
}>;
ticklabeloverflow: Attr<"allow" | "hide past div" | "hide past domain", {
description: "Hide labels past the figure or past the bar. Defaults to `hide past domain` for inside labels, else `hide past div`.";
values: readonly ["allow", "hide past div", "hide past domain"];
}>;
ticklabelposition: Attr<
| "outside"
| "inside"
| "outside top"
| "inside top"
| "outside left"
| "inside left"
| "outside right"
| "inside right"
| "outside bottom"
| "inside bottom", {
description: "Tick labels outside the bar (away from it) or inside (over it); `top`/`bottom` (`v`) or `left`/`right` (`h`) move them beside their tick.";
dflt: "outside";
values: readonly ["outside", "inside", "outside top", "inside top", "outside bottom", "inside bottom", "outside left", "inside left", "outside right", "inside right"];
}>;
ticklabelstep: Attr<number, {
description: "Label every n-th tick only (`tickmode` `auto` and `linear`).";
dflt: 1;
editType: "ticks";
min: 1;
}>;
ticklen: Attr<number, {
description: "Tick length in px.";
dflt: 5;
editType: readonly (
| "calc"
| "calcIfAutorange"
| "crossTraceCalc"
| "layout"
| "ticks"
| "plot"
| "style"
| "colorbars"
| "legend"
| "modebar"
| "camera"
| "none")[];
min: 0;
}>;
tickmode: Attr<"auto" | "linear" | "array" | "sync", {
description: "`auto` picks up to `nticks` round ticks; `linear` places ticks from `tick0` every `dtick`; `array` uses `tickvals`/`ticktext`; `sync` aligns with the overlaid axis (reserved; behaves as `auto`). Defaults to `array` when `tickvals` is set, `linear` when `dtick` is set, else `auto`.";
editType: "ticks";
values: readonly ["auto", "linear", "array", "sync"];
}>;
tickprefix: Attr<string, {
description: "Text before each tick label.";
dflt: "";
editType: readonly (
| "calc"
| "calcIfAutorange"
| "crossTraceCalc"
| "layout"
| "ticks"
| "plot"
| "style"
| "colorbars"
| "legend"
| "modebar"
| "camera"
| "none")[];
}>;
ticks: Attr<"" | "outside" | "inside", {
description: "Draw tick marks outside or inside the plot area, or not at all (`''`).";
dflt: "";
editType: EditType;
values: readonly ["outside", "inside", ""];
}>;
ticksuffix: Attr<string, {
description: "Text after each tick label.";
dflt: "";
editType: readonly (
| "calc"
| "calcIfAutorange"
| "crossTraceCalc"
| "layout"
| "ticks"
| "plot"
| "style"
| "colorbars"
| "legend"
| "modebar"
| "camera"
| "none")[];
}>;
ticktext: AttrSpec<DataArray, DataArray | undefined>;
tickvals: AttrSpec<DataArray, DataArray | undefined>;
tickwidth: Attr<number, {
description: "Tick width in px.";
dflt: 1;
editType: "ticks";
min: 0;
}>;
title: ObjectNode<{
font: ObjectNode<{
color: Attr<string, {
description: "Text color.";
editType: "style";
}>;
family: Attr<string, {
description: "CSS font-family list. The renderer uses the first family it can load and falls back through the list.";
noBlank: true;
strict: true;
}>;
lineposition: Attr<
| "none"
| "under"
| "over"
| "through"
| `under+${(...)}`
| `over+${(...)}`
| `through+${(...)}`, {
description: "Text decoration: `under`, `over` and/or `through` joined with `+` (e.g. `under+over`), or `none`.";
extras: readonly [...];
flags: readonly [..., ..., ...];
}>;
shadow: Attr<string, {
description: "CSS `text-shadow` behind the text (`2px 2px 3px black`; only the first shadow is drawn), `none`, or `auto` for a thin halo in the contrast color of the text.";
}>;
size: Attr<number, {
description: "Font size in CSS pixels.";
min: 1;
}>;
style: Attr<"normal" | "italic", {
description: "Font style.";
values: readonly [..., ...];
}>;
textcase: Attr<"normal" | "word caps" | "upper" | "lower", {
description: "Letter case transform: `upper`, `lower`, `word caps` (first letter of each word), or `normal`.";
values: readonly [..., ..., ..., ...];
}>;
variant: Attr<
| "normal"
| "small-caps"
| "all-small-caps"
| "all-petite-caps"
| "petite-caps"
| "unicase", {
description: "Capitals variant (CSS `font-variant-caps`). The SDF text renderer approximates small and petite caps with uppercase letters at a reduced size.";
values: readonly [..., ..., ..., ..., ..., ...];
}>;
weight: Attr<number | "normal" | "bold", {
description: "Font weight: a CSS numeric weight (1–1000), `normal` or `bold`.";
extras: readonly [..., ...];
max: 1000;
min: 1;
}>;
}>;
side: Attr<"right" | "top" | "bottom", {
description: "Where the title goes relative to the bar. Defaults to `top` (`v`) or `right` (`h`).";
values: readonly ["right", "top", "bottom"];
}>;
text: Attr<string, {
description: "Colorbar title.";
dflt: "";
}>;
}>;
x: Attr<number, {
description: "Horizontal position (`xref` fraction). Defaults to 1.02 (`v`, paper), 1 (`v`, container) or 0.5 (`h`).";
}>;
xanchor: Attr<"left" | "center" | "right", {
description: "Which side of the colorbar sits at `x`. Defaults to `left` (`v`, paper), `right` (`v`, container) or `center` (`h`).";
values: readonly ["left", "center", "right"];
}>;
xpad: Attr<number, {
description: "Horizontal padding, px.";
dflt: 10;
min: 0;
}>;
xref: Attr<"container" | "paper", {
description: "Reference of `x`: the plot area (`paper`) or the whole figure.";
dflt: "paper";
values: readonly ["container", "paper"];
}>;
y: Attr<number, {
description: "Vertical position (`yref` fraction). Defaults to 0.5 (`v`), 1.02 (`h`, paper) or 1 (`h`, container).";
}>;
yanchor: Attr<"top" | "middle" | "bottom", {
description: "Which side of the colorbar sits at `y`. Defaults to `middle` (`v`), `bottom` (`h`, paper) or `top` (`h`, container).";
values: readonly ["top", "middle", "bottom"];
}>;
ypad: Attr<number, {
description: "Vertical padding, px.";
dflt: 10;
min: 0;
}>;
yref: Attr<"container" | "paper", {
description: "Reference of `y`: the plot area (`paper`) or the whole figure.";
dflt: "paper";
values: readonly ["container", "paper"];
}>;
}>;
colorscale: AttrSpec<ColorScale, ColorScale | undefined>;
hoverinfo: Attr<
| "none"
| "text"
| "x"
| "y"
| "all"
| "z"
| `text+${string}`
| "v"
| "u"
| "w"
| "norm"
| "name"
| "skip"
| `x+${string}`
| `y+${string}`
| `z+${string}`
| `v+${string}`
| `u+${string}`
| `w+${string}`
| `norm+${string}`
| `name+${string}`
| readonly (
| "none"
| "text"
| "x"
| "y"
| "all"
| "z"
| `text+${string}`
| "v"
| "u"
| "w"
| "norm"
| "name"
| "skip"
| `x+${string}`
| `y+${string}`
| `z+${string}`
| `v+${string}`
| `u+${string}`
| `w+${string}`
| `norm+${string}`
| `name+${string}`)[], {
arrayOk: true;
description: "Which fields hover labels show: the position (`x`, `y`, `z`), the vector (`u`, `v`, `w`), its `norm`, `text` and the trace `name`; `'skip'` also turns hover events off.";
dflt: "x+y+z+norm+text+name";
editType: "none";
extras: readonly ["all", "none", "skip"];
flags: readonly ["x", "y", "z", "u", "v", "w", "norm", "text", "name"];
}>;
lighting: ObjectNode<Record<string, any>>;
lightposition: ObjectNode<{
x: Attr<number, {
description: `${string} of the light, in clip space (moves with the view; ±1 is the edge of the view, 1e5 far away).`;
dflt: number;
editType: "calc";
max: 100000;
min: -100000;
}>;
y: Attr<number, {
description: `${string} of the light, in clip space (moves with the view; ±1 is the edge of the view, 1e5 far away).`;
dflt: number;
editType: "calc";
max: 100000;
min: -100000;
}>;
z: Attr<number, {
description: `${string} of the light, in clip space (moves with the view; ±1 is the edge of the view, 1e5 far away).`;
dflt: number;
editType: "calc";
max: 100000;
min: -100000;
}>;
}>;
reversescale: AttrSpec<boolean, boolean>;
scene: Attr<"scene" | `scene${number}`, {
description: "The 3D scene this trace is drawn in: `'scene'` (`layout.scene`), `'scene2'` (`layout.scene2`), ….";
dflt: "scene";
editType: "calc";
}>;
showscale: AttrSpec<boolean, boolean>;
sizemode: Attr<"scaled" | "absolute" | "raw", {
description: "How cone lengths follow the vector norms. `scaled`: scaled so that the cones fit between neighbouring positions, times `sizeref`. `absolute`: the same, with `sizeref` in vector-norm units (the largest vector gets `sizeref`'s length). `raw`: the vectors' own lengths in data units, times `sizeref`.";
dflt: "scaled";
editType: "calc";
values: readonly ["scaled", "absolute", "raw"];
}>;
sizeref: Attr<number, {
description: "Scale of the cones (see `sizemode`). Default: 1 with `sizemode: \"raw\"`, else 0.5.";
editType: "calc";
min: 0;
}>;
text: Attr<string | readonly string[], {
arrayOk: true;
description: "Text per cone, shown in hover labels and as `%{text}` in templates.";
dflt: "";
editType: "calc";
}>;
u: AttrSpec<DataArray, DataArray | undefined>;
uhoverformat: Attr<string, {
description: `d3 number format of ${string} values in hover labels. Default: ${string}.`;
dflt: "";
editType: "none";
}>;
v: AttrSpec<DataArray, DataArray | undefined>;
vhoverformat: Attr<string, {
description: `d3 number format of ${string} values in hover labels. Default: ${string}.`;
dflt: "";
editType: "none";
}>;
w: AttrSpec<DataArray, DataArray | undefined>;
whoverformat: Attr<string, {
description: `d3 number format of ${string} values in hover labels. Default: ${string}.`;
dflt: "";
editType: "none";
}>;
x: AttrSpec<DataArray, DataArray | undefined>;
xhoverformat: Attr<string, {
description: `d3 number format of ${string} values in hover labels. Default: ${string}.`;
dflt: "";
editType: "none";
}>;
y: AttrSpec<DataArray, DataArray | undefined>;
yhoverformat: Attr<string, {
description: `d3 number format of ${string} values in hover labels. Default: ${string}.`;
dflt: "";
editType: "none";
}>;
z: AttrSpec<DataArray, DataArray | undefined>;
zhoverformat: Attr<string, {
description: `d3 number format of ${string} values in hover labels. Default: ${string}.`;
dflt: "";
editType: "none";
}>;
}>;Experimental
The cone schema.